分页: 1 / 1

我也写一个php demo, 获取电脑的相关监控数据

发表于 : 周五 11月 23, 2018 11:27
spender
在domoticz安装目录, 找到script目录后, 在下面创建一个 php 子目录,用于放置所有php接口的script。在里面可以写入任何php程序。
这儿演示的php使用了两个类, 一个是 telnet_class,一个是 mqtt的class。具体两个class可以到网上search。 代码如下:

代码: 全选

#!/usr/bin/php -q
<?php

// run this program , must do 
// linux command line
// $ composer require  brandonhudson/lightning
// $ ## just wait to download package

require dirname(__FILE__)."/vendor/autoload.php";
include "telnet_class.php";  // install at /usr/share/php


// Step 1: Get router tempera
    $telnet=new telnet;
    $telnet->set_host('更换为你的路由器的IP');  
    $telnet->connect();
    $telnet->set_prompt('ogin: '); $telnet->wait_prompt(); $telnet->write('登陆用户名');
    $telnet->set_prompt('word: '); $telnet->wait_prompt(); $telnet->write('登陆密码');
    $telnet->set_prompt('# '); $telnet->wait_prompt();
    $telnet->write('cat /proc/dmu/temperature');  # 我用的是梅林,其他请参考相关命令
    $telnet->wait_prompt();
    $output= $telnet->get_buffer();
    $telnet->write('exit');
    $telnet->disconnect();
      unset($telnet);
    // get last line from output, and delete last char
    $retStr=preg_split("/:/",$output);
    $temp=trim(substr($retStr[1],0,-2));
        $fp=popen("cat /sys/class/thermal/thermal_zone0/temp","r");
        $temp2=fread($fp,32);
        pclose($fp);
        echo "temp2=".trim($temp2)."\n";
        $temp2=intval($temp2)/1000;
        echo "temp2=".$temp2."\n";


// Step 2: Build json data
        // IDX=12   # 这个12是你在 domoticz 中定义设备的 idx 编号
        $message=array( "idx"=>12, "nvalue"=>0, "svalue"=>"$temp");
        $message=json_encode($message);
        var_dump($message);

// Step 3: send data  # 发送数据
        $host = "更换为你的mqtt服务器地址";
        $port = 1883;   #mqtt服务器端口
        $clientID = 'php'.md5(uniqid()); // use a unique client id for each connection
        $username = 'spender'; // username is optional
        $password = 'mqtt_access_password' ; // password is optional

        $mqtt = new \Lightning\App($host, $port, $clientID, $username, $password);

        if (!$mqtt->connect()) {
                echo "Failed to connect.\n";
        }

        $mqtt->publish("domoticz/in", $message, 1);
        $mqtt->publish("domoticz/in", $message, 1);
        $mqtt->close();
        unset($mqtt);

?>

需要的朋友们可以测试一下。

Re: 我也写一个php demo, 获取电脑的相关监控数据

发表于 : 周五 11月 23, 2018 20:58
Admin
这是获取路由器温度。